Fix tag typo and update wording.

1 files changed, 2 insertions, 2 deletions

diff --git a/html/blog/2025-06-23+GTX_260_Backplate+diy+computers.tmpl.html b/html/blog/2025-06-23+GTX_260_Backplate+diy+computers.tmpl.html
index a7e3183..06feed5 100644
--- a/html/blog/2025-06-23+GTX_260_Backplate+diy+computers.tmpl.html
+++ b/html/blog/2025-06-23+GTX_260_Backplate+diy+computers.tmpl.html
@@ -51,7 +51,7 @@
   <p>While sitting around the appartment, I realized I had mirror finish Pascal backplate on an EK block, and I immediately drew comparisons.</p>

   <figure>

     <img src="/static/media/GTX_260/EK_Comparison_1000.jpg" width="1000" height="750" />

-    <figure>Custom GTX 260 vs official EK Pascal block.</figure>

+    <figcaption>Custom GTX 260 vs official EK Pascal block.</figcaption>

   </figure>

   <p>It's not quite the same, but hits a similar feel.</p>

   <p>The next time in the shop, I was straight to work. Blanks were cut and the SLI slot size was finalized.</p>

@@ -83,7 +83,7 @@
     <img src="/static/media/GTX_260/Complete_Bottom_1000.jpg" width="1000" height="750" />

     <figcaption>Assembled SLI setup.</figcaption>

   </figure>

-  <p>Everything fit in the case, and it looks much better than it did. The things I'd like to work on are unifying the color scheme with the board by annodizing it, or bringing more brushed aluminum onto the board, as well as etching some logos and/or graphics into the plates. A BFG Tech or SLI logo attached to the bridge cover might also be cool.</p>

+  <p>Everything fit in the case, and it all looks much better than before. The things I'd like to work on are unifying the color scheme with the board by annodizing it, or bringing more brushed aluminum onto the board, as well as etching some logos and/or graphics into the plates. A BFG Tech or SLI logo attached to the bridge cover might also be cool.</p>

   <figure>

     <img src="/static/media/GTX_260/Installed_1000.jpg" width="750" height="1000" />

     <figcaption>Installed.</figcaption>