From 901e121bafb370184c4d9245a4b43a4693b7a2f8 Mon Sep 17 00:00:00 2001 From: Alex Scerba Date: Mon, 18 Nov 2024 22:06:02 -0500 Subject: Add new images, and move to absolute path for images. --- html/gallery.tmpl.html | 146 +++++++++++++++++++++++++------------------------ 1 file changed, 74 insertions(+), 72 deletions(-) (limited to 'html') diff --git a/html/gallery.tmpl.html b/html/gallery.tmpl.html index fa0010c..cda4737 100644 --- a/html/gallery.tmpl.html +++ b/html/gallery.tmpl.html @@ -9,72 +9,74 @@

Note: still under construction.

- Original Grado SR60 headphones with Aliexpress drivers, detachable cables, and custom 3D printed driver housings. - 40mm aftermarket driver installed into custom 3D printed housing. - 3D printed custom housing mated to original Grado ear cup. - Bottom of custom housing featuring the original hole pattern from the original SR60. - EQ profile for aftermarket 40mm in my custom SR60 headphones. Modifications as follows: +3db 30Hz, +1db 62Hz, n/a 125db, n/a 250db, -1db 500Hz, -4db 1kHz, -3db 2kHz, +3db 4kHz, +4db 8kHz, +4db 16kHz. - Mini Cooper S R53 with hood up getting oil drained in fall scene. - Reddit warning message stating that users must log in to view the full comments section. - Grado Labs Prestige Series SR60i headphones with aftermarket G cushions laying on wood table. - Concept digital painting depicting red wedge shaped space ship flying over a distant planet. - Tight shot on custom watercooling loop. EK Fluid Gaming components on GTX Titan Xp (2017) and Ryzen 5 3600. Build has an overall black parts theme with an amber light scheme. Parts are tightly framed by three brightly lit Corsair LL120 fans. Two are above on a radiator, the other is on the exhaust. - Bent sheet metal handle with sandblasted finish attached to face of drawer. Inside shot. - Bent sheet metal handle with sandblasted finish attached to face of drawer. - Drawer made from scrap plywood, MDF, and melamine laminated board. Front is made from black finish melamine. The handle is centered towards the top made from bent sheet metal. - Overview of bag and strap. - Bag open showing laptop compartment and zipper pockets. - Loaded, closed bag standing. - Blue Volvo 240 DL outside Dearborn Music. - Coco, my chocolate lab, standing in the driveway. - Mazda Miata and Chevrolet Silverado in a staredown in my driveway. - LEGO Boba Fett's Slave 1. - LEGO General Grievous's fighter. - LEGO CIS tank droid. - Completed sets lined up on the floor, second shot. - Completed sets lined up on the floor. - LEGO and action figures spread out across the livingroom floor. - Jack the cat stalking a lazer pointer. - Chevrolet Corvair in teal. - Ángel photographing the cow statues at Kopps. - Large sculpture of a sppon and cherry inside of Kopps. - Jeep CJ-7, Volvo 244, Mazda MX-5, and Chevrolet Silverado lined up in the driveway. - Side of the truck with new wheels fitted up front and original wheels in back. - Me in the wheel well fitting the strut. - Ben looking at engine bay while standing on tire in front of the truck. - Old LEGO box in a bag. - Field in Wisconsin. - Movie cover for the 1968 action/crime movie 'Bullitt'. - Jeep CJ-7 and Mazda MX-5 in front of the Milwaukee Art Museum. - Newer Jeep Willys parked next to my CJ-7 at the barber shop. - Me with longer hair, before my haircut. - Me sitting in the Jeep after the haircut. - Packed bags for roadtrip. Two backpacks, a drawstring bag, and a coat. - Ben and Rex in front of their cars, a 1989 Volvo 250 Sedan and 1997 Mazda MX-5. - Volvo from view of the Miata. - Bridge along I-96. - Rain in Lake Geneva, WI. - Sitting at the dinner table. - 1985 Jeep CJ-7 by Williams Bay waterfront. - Stereo setup with sub and TV. - Me and other students sketching cars at the CCS booth at Autorama 2024. - Meeting an LTU senior, Andrew Berry. - . - . - . - . - . - . - . - . - . - . - . - . - Skyline photo lightning in Detroit. Featuring the Fisher building. - Skyline photo lightning in Detroit. Featuring the Fisher building. - Clone Wars era LEGO Y-Wing model build out of 501st battle packs. Captain Rex minifigure in pilot seat. - Group photo of my friends and our bicycles on the steps in front of the GM RenCen by the Detroit River. + Picture of my Mid 2015 MacBook Pro 15-inch on a woodworking bench with VS Codium open on-screen editing this article. + Mini Cooper S R53 with large google eyes on headlights and two cardboard triangle teeth sticking out the bottom of the grill. Hood clamshell is open looking like a mouth about to chomp. + Original Grado SR60 headphones with Aliexpress drivers, detachable cables, and custom 3D printed driver housings. + 40mm aftermarket driver installed into custom 3D printed housing. + 3D printed custom housing mated to original Grado ear cup. + Bottom of custom housing featuring the original hole pattern from the original SR60. + EQ profile for aftermarket 40mm in my custom SR60 headphones. Modifications as follows: +3db 30Hz, +1db 62Hz, n/a 125db, n/a 250db, -1db 500Hz, -4db 1kHz, -3db 2kHz, +3db 4kHz, +4db 8kHz, +4db 16kHz. + Mini Cooper S R53 with hood up getting oil drained in fall scene. + Reddit warning message stating that users must log in to view the full comments section. + Grado Labs Prestige Series SR60i headphones with aftermarket G cushions laying on wood table. + Concept digital painting depicting red wedge shaped space ship flying over a distant planet. + Tight shot on custom watercooling loop. EK Fluid Gaming components on GTX Titan Xp (2017) and Ryzen 5 3600. Build has an overall black parts theme with an amber light scheme. Parts are tightly framed by three brightly lit Corsair LL120 fans. Two are above on a radiator, the other is on the exhaust. + Bent sheet metal handle with sandblasted finish attached to face of drawer. Inside shot. + Bent sheet metal handle with sandblasted finish attached to face of drawer. + Drawer made from scrap plywood, MDF, and melamine laminated board. Front is made from black finish melamine. The handle is centered towards the top made from bent sheet metal. + Overview of bag and strap. + Bag open showing laptop compartment and zipper pockets. + Loaded, closed bag standing. + Blue Volvo 240 DL outside Dearborn Music. + Coco, my chocolate lab, standing in the driveway. + Mazda Miata and Chevrolet Silverado in a staredown in my driveway. + LEGO Boba Fett's Slave 1. + LEGO General Grievous's fighter. + LEGO CIS tank droid. + Completed sets lined up on the floor, second shot. + Completed sets lined up on the floor. + LEGO and action figures spread out across the livingroom floor. + Jack the cat stalking a lazer pointer. + Chevrolet Corvair in teal. + Ángel photographing the cow statues at Kopps. + Large sculpture of a sppon and cherry inside of Kopps. + Jeep CJ-7, Volvo 244, Mazda MX-5, and Chevrolet Silverado lined up in the driveway. + Side of the truck with new wheels fitted up front and original wheels in back. + Me in the wheel well fitting the strut. + Ben looking at engine bay while standing on tire in front of the truck. + Old LEGO box in a bag. + Field in Wisconsin. + Movie cover for the 1968 action/crime movie 'Bullitt'. + Jeep CJ-7 and Mazda MX-5 in front of the Milwaukee Art Museum. + Newer Jeep Willys parked next to my CJ-7 at the barber shop. + Me with longer hair, before my haircut. + Me sitting in the Jeep after the haircut. + Packed bags for roadtrip. Two backpacks, a drawstring bag, and a coat. + Ben and Rex in front of their cars, a 1989 Volvo 250 Sedan and 1997 Mazda MX-5. + Volvo from view of the Miata. + Bridge along I-96. + Rain in Lake Geneva, WI. + Sitting at the dinner table. + 1985 Jeep CJ-7 by Williams Bay waterfront. + Stereo setup with sub and TV. + Me and other students sketching cars at the CCS booth at Autorama 2024. + Meeting an LTU senior, Andrew Berry. + . + . + . + . + . + . + . + . + . + . + . + . + Skyline photo lightning in Detroit. Featuring the Fisher building. + Skyline photo lightning in Detroit. Featuring the Fisher building. + Clone Wars era LEGO Y-Wing model build out of 501st battle packs. Captain Rex minifigure in pilot seat. + Group photo of my friends and our bicycles on the steps in front of the GM RenCen by the Detroit River. Used MacBook, two ThinkPad X230 Tablets, two iPod nanos and an iPod Mini on a table. Me on my engine swapped Honda Ruckus riding down Woodward Ave. My 300E next to an SEL. @@ -95,11 +97,11 @@ Rear of completed build. Top of case featuring original 'High Voltage' sticker from when it used to be a power supply. Final interior shot with second radiator installed. - Disassembled turn signal lamp assembly: housing, wire harness, contact that broke off wire, degraded rubber grommet, bulb, and lens cover. - Sanded and re-foamed turn signal bucket - Soldered and repaired turn signal harness - Front of final lamp assembly - Rear of final lamp assembly - + Disassembled turn signal lamp assembly: housing, wire harness, contact that broke off wire, degraded rubber grommet, bulb, and lens cover. + Sanded and re-foamed turn signal bucket + Soldered and repaired turn signal harness + Front of final lamp assembly + Rear of final lamp assembly +
{{ end }} -- cgit v1.2.3